The install kit
The parts that go under and around the turf, packed with your order so the job does not stop for a trip to the store.
Loading your cart.
One kit covers all the turf in your order. Add it here, from any product page or from your cart.
What is in the kit
Weed barrier
Fabric that goes down on the prepared base, under the turf, to stop weeds from growing up through it. You get enough to cover your turf area.
Turf staples
6 inch U-shaped steel staples that pin the edges and seams to the base. You get a bag of 100 for every 300 square feet.
Seam tape and adhesive
Where two rolls lie side by side, the tape goes under the joint and the adhesive bonds both edges to it. You get them when a line in your order has two rolls or more.
Sand infill
Silica sand that you brush into the blades. It weighs the turf down and helps the blades stand up. You get 1.5 to 3 pounds per square foot, by the pile height of your turf.
What a kit costs
- 15 x 20 ft, one roll (300 sq ft)$633
- 30 x 20 ft, two rolls side by side (600 sq ft)$1,398
- 30 x 40 ft, two rolls side by side (1,200 sq ft)$2,343
The kit is sized to the turf in your cart, so its price follows your square footage. Each pack has one fixed price:
- Weed barrier, 6 x 300 ft roll$362
- Weed barrier, 3 x 50 ft roll$92
- Turf staples, 6 in, bag of 100$17
- Seam tape, 12 in, 50 ft roll$44
- Seam adhesive, 29 oz tube$47
- Silica sand infill, 50 lb bag$36
What you still need
Base material such as crushed rock or decomposed granite, a plate compactor, a utility knife with spare blades, a drop spreader for the infill, a stiff broom or a power broom, and edging such as bender board where the turf meets soil or planting beds. Our installation overview lists the tools in full.